]]>
I do it by ear, turning everything down, then turning the track I know to be the loudest to around -12dB, then turn the others up so they match it nicely.
I usually do thise while also playing with the pan settings, as this also affects the volume in some ways, panning them a little bit (1% or 2%) to the left og right.
---
A trick I sometimes use when mixing, is turn all tracks down and mute them, add a track only playing pink noise, and then unmute a track and turn it up till it's barely listenable through the pink noise, and mute it again. Do this with each track. Then delete the pink noise and unmute everything.
I guess you could do this with full songs too. Load all your songs into your DAW in sequence, and put a pink noise track under them, and turn up or down the volume of each track, so they're barely listenable through the noise.
Pink noise technique
iframe
Statistics: Posted by Alojzy Kowalczyk — Sun Sep 25, 2016 12:15 pm
]]>
I would personally match levels by ear. No algorithm provides the human factor, which can distinct between dominant part of mix.. sometimes you're balancing by perceived volume of lead vocal, sometimes drums.. sometimes by volume of first verse, because it is sequenced right after previous song. It is material dependent. Of course, current broadcast standards for loudness measurement are quite elaborate and usually provide good average results, I feel, it is usually done better by ear.
Anyway, just another tip without actually buying of anything, if you really want to use helper..
You haven't tell about your platform, but if you are on Windows, there is another way, how to do that.
Foobar2000 player has built in replay-gain scanner, which uses R128 loudness detection algorithm (so basically same as Nugen, etc.).. only difference is in target level, which is -18LUFS.
You can load your songs to playlist select all of them, hit right-click for context menu and use ReplayGain/Scan per-file track gain.. After completion, new pop-up with levels table appears.
Now, you can either
- enter that values in per-clip manner into your DAW (not big deal) and then possibly adjust all clips at once (so relative level differences are preserved)
or
- update tags and apply measured gain offset using Foobar2000 converter (generating new wav files)
to do that you need to setup built-in converter (accessible again via right click menu) for output to 32bit floating point wavs (so no dithering will be necessary and you ain't loose any resolution)
in converter processing section, you'll need to enable actual gain sourced from file tags
It looks like cumbersome solution, but it works well and that setup is necessary to do only one time, because you can easily save whole converter setup to preset. So then it became only two step process - detect ReplayGain and convert to new wavs via right-click menu.
Additionally, you can enter offset for gain apply, so if you don't need -18LUFS target level, you just modify it. Eg. for -23LUFS (broadcast), you just move first slider to -5dB and save it as another preset.
https://www.gearslutz.com/board/masteri ... songs.html
I am using Foobar, have to try this.
Statistics: Posted by Vojeet — Mon Sep 19, 2016 3:36 pm
]]>
How do you guys work this out? How do you determine a certain level that's standard to all the other music in the world?
Statistics: Posted by verdroid — Sun Sep 18, 2016 6:48 pm
]]>
https://hawawamen.wordpress.com/2016/08/26/sample-pack-lists-for-breakcore-jungle-drumnbass-hardcore/
Statistics: Posted by SNM — Fri Aug 26, 2016 7:08 am
]]>
]]>
just look up youtube, type something like 'ned rush gabba breakcore'
![[biggrin]](http://mockradar.online.fr/f/images/smilies/biggrin.gif "briggin")
Statistics: Posted by verdroid — Tue Apr 26, 2016 1:29 pm
]]>
[youtube]https://youtu.be/ksvvjCtJWeE[/youtube]
[youtube]https://youtu.be/7KtKdRhUr6o[/youtube]
Statistics: Posted by verdroid — Tue Apr 26, 2016 1:27 pm
]]>
Also check this for other shit: http://flintpope.com
And http://fluxhome.com for a cool stereo-tool and a good transient-shaper.
Statistics: Posted by Alojzy Kowalczyk — Thu Apr 21, 2016 12:43 pm
]]>
any help with midi effects?
Im looking for cool vst that can affect midi notes arrangement, pitch,... loop/stutter midi notes.
Not vst audio effect, Not vst instrument. But vst midi effects or vst modi sequencers with or without more options.
Example:
-ableton has arpeggiator and pitch for midi notes
-audio realism: bassline 2 is an 303 emulating vst BUT you can sent out midi notes to other midi receiving gear.
i found a lot of cool things for audio, but im looking for midi specific vst
who helps me :-) thnx in advance
Statistics: Posted by verdroid — Tue Mar 31, 2015 5:43 pm
]]>
I just stumbled into this. The website isn’t much to look at, but what it lacks in visual appeal it makes up for with its database of freeware for musicians. Boasting over 500 free devices from all walks of life!
Statistics: Posted by Vojeet — Mon Mar 30, 2015 8:43 am
]]>
then i bought this baby
SOUNDCRAFT STUDIO LIVE 4 (i got a nice deal)
Statistics: Posted by verdroid — Sat Oct 26, 2013 11:13 pm
]]>
Statistics: Posted by SNM — Tue Oct 15, 2013 8:44 am
]]>
Allen & Heath MixWizard 16:2 WZ³
16 channels - 4 band eq - 6 aux - 100mm faders
http://www.allen-heath.com/UK/Products/ ... Wizard3162
+++++++++++++++++++++++++++++++++++++++
i also discovered that you can use an electribe as sequencer to sequence external hardware gear
![[dirol]](http://mockradar.online.fr/f/images/smilies/dirol.gif "dirol")
so bye bye laptop...you'll move from the studio to the living room were you belong.
[youtube]https://www.youtube.com/watch?v=ThxnMUbdpcY[/youtube]
Statistics: Posted by verdroid — Sat Oct 12, 2013 12:06 am
]]>
![[siffle]](http://mockradar.online.fr/f/images/smilies/siffle.gif "whistle")
Statistics: Posted by SNM — Thu Jul 18, 2013 10:38 am
]]>